Alfa Laval Plate Heat Exchanger Plate

We offer replacement PHE Plate for Alfa Laval models below,all the Plate can replace with orignal one.

Plate material:
304 Stainless Steel
This is the lowest cost heat transfer plate material. It has a low corrosion resistance
and is usually only available in a thickness of 0.4mm. This type of heat transfer plate
is typically used on HVAC applications.

316 Stainless Steel
This is the most common heat transfer plate material and is used in many applications.
316 stainless steel has a high corrosion resistance and is typically available in thickness
from 0.4mm up to 0.8mm.

Titanium
This has a very high resistance to chemical attack including most acids, chlorides,sea water,and chlorine chemicals. Titanium is usually available in thicknesses from 0.5mm up to 0.6mm

Hastelloy C276

Other common names: Alloy C276, Hastelloy C, Inconel® C-276 Hastelloy C-276
Hastelloy C276 is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.Alloy C-276 is widely used in the most severe environments such as chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment, and recovery of sour natural gas. Thickness available from 0.6mm to 0.8mm.

SMO 254

Sandvik 254 SMO is a high-alloy austenitic stainless steel developed for use in seawater and other aggressive chloride-bearing media. Thickness available from 0.6mm to 0.8mm